BSI Un-Cure CA Debonder (1 oz)

BSI Un-Cure CA Debonder (1 oz)

€5,95 EUR
Skip to product information
BSI Un-Cure CA Debonder (1 oz)
  • BSI Un-Cure CA Debonder (1 oz)
  • BSI Un-Cure CA Debonder (1 oz)
BSI Un-Cure CA Debonder (1 oz)

BSI Un-Cure CA Debonder (1 oz)

€5,95 EUR
Taxes included. Shipping calculated at checkout.

UN-CURE debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastic parts with a razor saw is usually the best option. Warning: Eye and respiratory irritant. Use with adequate ventilation. KEEP OUT OF REACH OF CHILDREN.

GENERAL SAFETY WARNINGS:

TOOLS: May have sharp edges or points. Handle with care.

SMALL PARTS: Choking hazard. Keep away from young children.

PAINTS, GLUES & CHEMICALS: Use in a well-ventilated area. Avoid contact with skin and eyes. Do not ingest. Wear appropriate personal protective equipment.

CA GLUE: Bonds skin and eyes in seconds. Keep out of reach of children.

VOLATILE & FLAMMABLE LIQUIDS: Keep away from heat, sparks and open flames. Do not inhale vapours. Use in a well ventilated area.

Always read and follow the product-specific instructions and safety warnings before use.