BSI Insta-Cure Super Thin CA Glue (2 oz)

Insta-Cure has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. Warning: Eye irritant. Bonds skin in seconds. If eye contact occurs, flush with water only and get medical attention. If skin bonding occurs, peel, don't pull; soak in UN-CURE or acetone if necessary. Use with adequate ventilation. KEEP OUT OF REACH OF CHILDREN.