BSI Insta-Cure+ Gap Filling Super CA Glue (1 oz)

Insta-Cure+ is a higher viscosity cyanoacrylate (CA) glue for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

Warning: Eye irritant. Bonds skin in seconds. If eye contact occurs, flush with water only and get medical attention. If skin bonding occurs, peel, don't pull; soak in UN-CURE or acetone if necessary. Use with adequate ventilation. KEEP OUT OF REACH OF CHILDREN.